Survey
Did you know?
Partner sites
| |
 
|
Microcontroller programmers
|
| Projects articles - Microcontroller programmers |
This is probably most used programator for Microchip microcontrollers. It's main advantage is USB communication and power supply at once. It supports allmost all Microchip controllers. (you will probably never work with ones it doesnt support.. ) . PCB is tested and working properly. It is easy to build DIY. This is version using PIC18F4550
|
| Projects articles - Microcontroller programmers |
This is probably most used programator for Microchip microcontrollers. It's main advantage is USB communication and power supply at once. It supports allmost all Microchip controllers. (you will probably never work with ones it doesnt support.. ) . PCB is tested and working properly. It is easy to build DIY.
There are two versions of PCB given true hole and SMD. Both are functionally the same. This is SMD version and only controller is through hole.
Pic/dsPic USB programmer PICKIT2 through hole with PIC18F2550 - DIY programator
| 
| Projects articles - Microcontroller programmers |
This is probably most used programator for Microchip microcontrollers. It's main advantage is USB communication and power supply at once. It supports allmost all Microchip controllers. (you will probably never work with ones it doesnt support.. ) . PCB is tested and working properly. It is easy to build DIY.
There are two versions of PCB given true hole and SMD. Both are functionally the same.
Pic/dsPic parallel port programmer - DIY programator
|
| Projects articles - Microcontroller programmers |
This programator is reliable and extremly cheap to build.
I used it many times and never had problems with it. And all components are easy to get so it will be no problems to DIY and make one.
Parallel port AVR, 8051 programmer - DIY programator
|
| Projects articles - Microcontroller programmers |
SPI Flash Microcontroller Programmer Ver 3.7
Introduction
This SPI Flash Programmer can be used either for in-system programming or as a stand-alone serial flash programmer for the Atmel SPI programmable devices. The programmer hardware interface is controlled by the PC parallel port and the parallel port control signals are freely selectable by the user. The software supports both the 8051 and AVR series devices.